USED

The Barco NGS-D200 Pro encoder and decoder provides the highest quality visual experience for collaborators. This encoder/decoder supports over 4 megapixel video and graphics sources with audio over any IP network environment.

Using the high performance Video-to-Data (V2D) codec, the NGS-D200 accurately captures and streams content from point-to-multipoint with low latency, thus increasing communication and cohesion among global teams. Integrated keyboard and mouse control with encoding and decoding functionality in a single unit creates a seamless environment for application sharing, simulation and training needs.

Key features

• High resolution support: Dual link DVI-I input capable of streaming video and graphics of over 4 million pixels over any network

• Visually lossless codec: Compress HD high resolution graphics ensuring pixel-perfect delivery regardless of available bandwidth, while using 4:4:4 color space conversion (*)

• Application programming interface (API): Allow integration of the NGS-D200 and recording/playback functionality in the workﬂow via the BCS management system API

• Passive video loop-through: Ensures a reliable video source without power

• Redundant LAN: Failover protection to maintain network connectivity with zero downtime

• Conﬁgurable modes: Switch between encoding and decoding in a single unit

(*)To preserve pixel detail, the codec will reduce the frame rate when the bandwidth limit is reached

Product speciﬁcations NGS-D200 PRO

General speciﬁcations

Number of channels 1 video channel

USB ports 2xType A for KB/M; 1xType B towards host PC

Audio inputs & outputs 3.5 mm locking stereo jack audio line in-out (rear), 3.5 mm mic & headphone (front)

Audio channels Stereo/mono

Audio format Pulse code modulation (PCM)

Sync Hardwired end-to-end; Timestamp NTP

Network 2×1000 Base T RJ 45 (redundant LAN)

Networking protocol IPv4; Unicast-multicast (IGMP version 2)

Device configuration storage Removable SD Card

QoS/error concealment Advanced mechanisms to cope with packet loss, network latency, and jitter that are fully configurable on the fly

Management Interface Managed mode – Admin/Client interface, Web Endpoint Controller Standalone mode – Web interface

Power supply External, locking adapter

110/220 V AC, 60/50 Hz, 40W (136 BTU’s/hr), auto switchable

Rack mount Optional rack mount equipment available

Dimensions WxDxH 186.9mm x 121.92mm x 41.15mm / 7.37” x 4.8” x 1.62”

Weight 1.6 kg / 3.6 lbs

Dimensions packaged (W x H x D) 382mm x 273mm x 85mm | 15,04″ x 10,75″ x 3,35″

Packaged weight 2.0 kg / 4.40 lbs

Operating temperature range 0-40°C, 32-104F

Video Tx – Passive loopback of local input signal

Rx – Passive loopback of local input signal, signal from remote source, PiP (with scaling, alpha and chroma control)

Audio Tx/Rx – Local audio input; signal from remote source; mix of both with mixing level control

Codec Proprietary V2D (Video-to-Data) with 4:4:4 and 4:2:2 color sampling and real-time compression tuning Software decodable

Video board features On-the-fly switching between Tx & Rx

Certification and compliance Safety: UL/CSA/EN/IEC 60950-1 CB report

EMC: CE, FCC Part 15 Class A, CISPR 22, ICES-003, CCC

NGS-D200 Pro

Video inputs, outputs per channel Dual-link DVI-I in / Dual-link DVI-D out

Resolution range 800×600 (min) to 2560×1600@60Hz or 3840×2160@30Hz (max)

Encode rate (resolution dependent) 60fps: 800×600, 1280×720, 1280×720, 1280×1024, 1600×1200, 1920×1080, 1920×1200

30fps: 2560×1600

15fps: 3840×2160

Pixel clock DVI – 330 MHz

Analog – 170MHz

3D capability No

Barco

Barco Ultra HD Encoder Decoder NGS-D200 Pro